Volume 4  No. 2  May 2016    #1, An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites, pp.1-6   #2, Studying the effects of nano sintering additives on microstructure and electrical properties of potassium-sodium niobate piezoceramics, pp.7-15   #3, An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior, pp.16-26   #4, Binder-free copper hexacyanoferrate electrode prepared by pulse galvanostatic electrochemical deposition for aqueous-based Al-ion batteries, pp.27-31   #5, Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology, pp.32-36   #6, Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanospheres via Stöber Method, pp.37-43  No. 1  February 2016    #1, Waste Management of Building Ceramic Materials Using the DfD Technique: Sustainable Development and Environmentally Friendly, pp.1-11   #2, An Investigation on Milling Method in Reduction of Magnesium Nano-Powder Particles Based on Sustaining Chemical Activity , pp.12-17   #3, Oxidation of ZrB2-SiC Composites at 1600 °C: Effect of Carbides, Borides, Silicides, and Chopped Carbon Fiber , pp.18-23   #4, Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum, pp.24-31   #5, Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals, pp.32-39   #6, Synthesis of MgTiO3 Powder Via Co-Precipitation Method and Investigation of Sintering Behavior, pp.40-44   #7, Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study, pp.45-51  Volume 3  No. 4  November 2015    #1, The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics, pp.1-5   #2, Effect of the Sulfur Concentration on the Optical Band Gap Energy and Urbach Tail of Spray-Deposited ZnS Films, pp.6-12   #3, Pseudomorphic Reaction: A New Approach to Produce Bulk Mesoporous Silica as Catalyst Support in Methane Reforming, pp.13-20   #4, Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method, pp.21-24   #5, Theoretical Assessment of the First Cycle Transition, Structural Stability and Electrochemical Properties of Li2FeSiO4 as a Cathode Material for Li-ion Battery, pp.25-33   #6, Enhanced Phtocatalytic Activity of α-Fe2O3 Nanoparticles Using 2D MoS2 Nanosheets, pp.34-40   #7, The Effect of Zircon on Long-Time Corrosion Resistance of Alumina, pp.41-48  No. 3  August 2015    #1, Structural Investigation, Physical and Optical Properties of Mixed Alkali Bismuth Borate Glasses, pp.1-7   #2, Preparation and Characterization of High Specific Surface Area γ-Alumina Nanoparticles Via Sol-Gel Method, pp.8-15   #3, Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution , pp.16-18   #4, Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery, pp.19-25   #5, Determination of the Nucleation and Crystallization Parameters for Making Nanoporous Titanium Phosphate Glass-ceramics, pp.26-31   #6, Effect of NiTi Addition on the Wear Resistance of YSZ Coatings, pp.32-37   #7, Preparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method, pp.38-47  No. 2  May 2015    #1, Determination of cristobalite phase content in ceramic cores using various X-ray quantitative phase analysis methods, pp.1-6   #2, Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique, pp.7-13   #3, Evaluation of Heterogeneous Densification, Anisotropic Shrinkage and Rheological Behavior of Ceramic Materials during Liquid Phase Sintering by Numerical-Experimental Procedure , pp.14-24   #4, The Effect of Raw Material Ratios on the Fe-TiC/Al2O3 Composite Formation Mechanism, pp.25-30   #5, Enhancing the bioactivity of a calcium phosphate glass-ceramic with controlled heat treatment, pp.31-37   #6, Nanowires fine tunable fabrication by varying the concentration ratios, the etchant and the plating spices in metal-assisted chemical etching of <111> silicon wafer., pp.38-44   #7, Preparation of Cr-doped TiO2 thin film by sonochemical/CVD method and its visible light photocatalytic activity for degradation of paraoxon, pp.45-52  No. 1  January 2015    #1, Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite , pp.1-5   #2, In-situ Fabrication of Transparent Magnesium Aluminate Spinel by Spark Plasma Sintering, pp.6-9   #3, Preparation of aliened porous Ni-GDC nano composite by freeze-casting process, pp.10-15   #4, Implementation of EIS for dopant profile analysis in n-type silicon , pp.16-20   #5, Effect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method, pp.21-25   #6, Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting, pp.26-30   #7, Reverse chemical co-precipitation: An effective method for synthesis of BiFeO3 nanoparticles , pp.31-36  Volume 2  No. 4  September 2014    #1, The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting, pp.1-6   #2, Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance, pp.7-12   #3, Nb2O5 Nanoparticles Synthesis by Chemical Surfactant-Free Methods: ltrasonic Assisted Approach, pp.13-17   #4, Investigation of Macroporous Calcium Phosphate Cement Obtained by Foamed Gelatin Polymer, pp.18-24   #5, Investigation of HF/H2O2 Concentration Effect on Structural and Antireflection Properties of Porous Silicon Prepared by Metal-Assisted Chemical Etching Process for Photovoltaic Applications, pp.25-31   #6, Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method , pp.32-38   #7, Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating, pp.39-43   #8, Correlation Between Surface Morphology and Optical Properties of Quasi-Columnar Porous Silicon Nanostructures , pp.44-49  No. 3  August 2014    #1, Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution, pp.1-4   #2, In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite, pp.5-11   #3, Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite, pp.12-16   #4, Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2, pp.17-24   #5, Effect of ball milling on reactive microwave sintering of MgO-TiO2 System, pp.25-28   #6, Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid , pp.29-33   #7, Investigation of resistive switching in anodized titanium dioxide thin films, pp.34-37  No. 2  April 2014    #1, Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method, pp.1-6   #2, Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method, pp.7-15   #3, Phlogopite glass-ceramic coatings on stainless steel substrate by plasma spray, pp.16-21   #4, Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS, pp.22-26   #5, Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application, pp.27-31   #6, Effect of LiCl on the Microstructure and Luminescence Properties of YVO4:Eu3+ and YBO3:Eu3+ Phosphors, pp.32-36   #7, Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics, pp.37-47  No. 1  December 2014    #1, Electrical Resistivity Measurement of the Molten Cordierite Glass Using Two-wire method , pp.1-4   #2, The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks , pp.5-12   #3, Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite , pp.13-18   #4, Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates , pp.19-25   #5, Aqueous Extract of Acanthophyllum laxiusculum Roots as a Renewable Resource for Green synthesis of nano-sized titanium dioxide using Sol-gel Method , pp.26-31   #6, Optimization of the nanoporous silicon structures by magnesiothermic reduction of the as-synthesized silica , pp.32-37   #7, Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure , pp.38-43  Volume 1  No. 3  October 2013    #1, Investigation of crystallization and sinterability properties of BaO-Al2O3-SiO2 glass-ceramics containing K2O and B2O3, pp.1-10   #2, Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics, pp.11-15   #3, Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers, pp.16-21   #4, Microstructure and Magnetic Properties of Sr2Co1.7Mg0.3Fe11.2 Hexaferrite Synthesized by Auto-Combustion Sol-Gel Method, pp.22-27   #5, Characterization and Corrosion Behavior of Hydroxyapatite- Coated Titanium Substrates Prepared Through Laser Induced Liquid Deposition Technique , pp.28-33   #6, In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed, pp.34-38   #7, Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering, pp.39-43  No. 2  June 2013    #1, Luminescence Properties of TeO2-LiF-Gd2O3 Glasses, pp.1-5   #2, Fabrication of Graphene Oxide Thin Films on Transparent Substrate via a Low-Voltage Electrodeposion Technique, pp.6-10   #3, The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite, pp.11-17   #4, Titanium and Fluoride Co-substitution in Hydroxyl Apatite, pp.18-23   #5, Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions, pp.24-28   #6, Rheological Study of Nickel Ferrite Ferrofluid, pp.29-33   #7, Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering, pp.34-39   #8, Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling, pp.40-44  No. 1  March 2013    #1, Effect of milling time and microwave sintering on microhardness and electrical properties of nano and micro structured cordierite, pp.1-5   #2, Luminescence Properties of Oxyfluoride Glass and Glass Ceramic Doped with Y3 + Ions, pp.6-10   #3, Determining the optimal conditions for calcium titanate nanoparticles synthesized via mechanical alloying method, pp.11-16   #4, Molecular dynamics studies of straight-chain alkanes diffusion in SiO2 ceramic versus Bosanquet formula, pp.17-26   #5, Thermal expansionc oefficient of Ln0.6Sr0.4Co0.2M0.8O3−δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) perovskite oxide, pp.27-31   #6, Affectability of ceramic nanoparticles of different compound from surface characteristics in AC electrophoretic deposition, pp.32-35   #7, Effects of time, temperature and precursor on solid state synthesis of α-TCP, pp.36-39   #8, Simulation of the effect of sub- micron interface roughness on the stress distribution in functionally graded thermal barrier coatings (FG- TBC), pp.40-47